View Single Post
  #1  
Old 2018-07-04
Stephan's Avatar
Stephan Stephan is offline
Non-WIMAC Member
First Name: Stephan (Décédé - Repose en paix)
Last Name: Gaines
MAAC Number: 86196
WIMAC WINGS: Solo
 
Join Date: Dec 2014
Posts: 49
Stephan is on a distinguished road
Send a message via Skype™ to Stephan
Re the second stand I promised

Hey folks! I finally found time to make the second stand that I promised I would make. I noticed that the other one I made had some problems. The height and the rubber coming off. I fixed the rubber. It seems like someone fixed the height. I took all the factors into account for the new stand I built today. Depending on what you want you can adjust the height of the new stand. Just bring a torque drill with a standard Robertson head (red) and move the stand up or down the 2X6s. I kept cost down by using some old patio wood I had and left over screws from the last build. Cost was $86.00. Hope you guys use the new stands and there should be no need to wheel them off to the side. Besides. the old stands are just that old and rickety. They are now unsafe.
Reply With Quote