Planes for sale

[Michael V]

Well I am making room for a bigger! plane and with my wife permission :)
I have to sell off a couple first.

Here they are:

First in my Mini Edge540 It come with a
E-flight Park480 910kv Outrunner (EFLM1500), and a
E-flight ESC Brushless 40A(EFLA312B)
6 S70 Servo's Dig Sub-Micro 7.5g (EFLRDS75)
3 Thunder power 3cell lopo's 1 Li-Po 2200mAh eXtreme 11.1V and 2 Li-Po 2050mAh eXtreme 11.1V
3 new APC parkflyer 12-6 props
a Li-Po Balancer 2-5 Cell (THP205)
and a Kevlar charge bag,
Now please note there 2 planes here, 1 is build but just had a small crash and the other 2nd is new in the box!
I and asking $450, this a steel.

Second airplane is my Funtana X50, man is plane was fun to fly!
The airframe is not new but in good condition
the motor on the other hand is a BRAND NEW Satio 82a in the box!
The orginal motor broke and horizen hobbies just sent me a new one.
I have a slimline pitts muffler for it and Hitec 5925 with 4-40 pushrods and ball-links
I am also throwing in a glow starter, feild box, power panel, starter, fuel pump, fuel, CF landing gear, skies and prop's.
All for $500.00
Wow that is a good deal, ah?

3rd and final is my brand new Great Planes Yak-54 1.60 81" wingspan
I just finished building this a month ago.
I have a DL-50 on it (great engine) a pitts muffler(Brisson)
a couple of 22-8 prop's, 2 spinners, new hitec servo's, CF pushrods etc..
You have to see it, the power to weight is amazing! 3D ready, IMAC also.
I am asking $900.00 and I am pretty firm on this price.

[finnegan]

Hi Michael,

That's exactly the plane I was going to pick up.
I'll take it if it's still available.
Let me know.
Thanks,
Larry

[zorba]

Hi Michael, nice stuff. wish I could buy one, But I have too many already. Are you back now? Are you going to be at the field Sat, or Sunday?
Remember I talk to you about the Cessna?.
Let me know and I can make arrangements to be there when you are. Is going to be a long day, hot and nervewrecking day, for me anyway.
Cheers
Bill

[Michael V]

Larry, I still have the plane, just tell me the one you want.

Bill I will be there this week-end see you there.
I was at the Amidair IMAC this past week-end and a couple of weeks before that I was at the Nat's in Sudbury. That's why I have not been around.
There is just the Brosair IMAC Sept 6th left in the season :( IMAC is so much fun guys!
Check out Ron's 50% Pitts challenger, Paul was there with his 42% aerotech Extra, nice plane. I called for Bob during the unknowns (wow that was fun!) OH and Trever has the same Bipe as Dwight, he used it in the freestyle and almost lost it, inchs from the soya field.

Later

[bob forest]

Mike, the fellows can see all the pictures in the Aerobatics Thread.
Thanks to you and Ben for calling for me, it was a ball, and lot's of laughs.
here are the pics of the first day, in case you don't see them on the Thread Aerobatics.
http://picasaweb.google.com/ace1937/AmidaireIMAC2008?authkey=AO3ZBIxJGi4
this is the first day, with the pictures of the explosion. The second day you will hve to go to the
Aerobatics thread, and see the 50% pics doing low, low hovering.
Ok, here is the second day.
http://picasaweb.google.com/ace1937/IMACAmidaire2ndDay?authkey=xWY7KtryJpc
this is a lot of work. But what a guy will do for club members.

[Michael V]

Hey everyone!
I still have the Funtana and mini up for graps.
Someone said they wanted the Funtana but back out in the end.
If you just want the plane and motor no feild box, I let it go for $425.00

later
Michael

By the way don't forget, IMAC Sept 6! at Brossair.

[drgilo1973]

hi mike , i know that u owned a hobbico trainer u still have it ?? i have a client for it

[Michael V]

hi mike , i know that u owned a hobbico trainer u still have it ?? i have a client for it

Hey Guys!
Sorry I sold that.
But, contarie to what some people might say the Funtana is a good plane 2nd plane to advance your flying skills on. It was my 2nd plane. If you have the basics down you can learn to fly it well.