PDA

View Full Version : Metric bolts, etc.


beto9
2009-12-17, 04:24 PM
I found this shop in New Jersey (Niu Yoisy) that has a great choice of socket head bolts, both SAE and metric. Specially the metric have many of the odd sizes that are difficult to find. Also he has reasonable quantities packages besides the bulk ones.
He has great customer service, answering any question right away by mail.
Also, if the "calculated" shipping costs scare you when making an order just choose to "pay by cheque" and he will send you an e- mail with the proper shipping costs and you pay Paypal.
Also he has those servo screws with hexagonal heads (2/56) with a great selection of sizes (I use them for cowls, etc. besides servos)

http://www.jrhobbyhardware.com/shop/

beto9
2009-12-17, 04:31 PM
By the way, it mystifies me how to make an entry in the Link or Links directory.
Under "WIMAC" there is a "Link Directory"
Under "Forum" (which probably should be called "forae"), submenu "General" there is a "Links Directory".
And I never know how to make an entry on the right one to spread the word of this or that good shop.

Albert, over and out!

xed
2009-12-18, 12:09 PM
You create the links from the top menu under "WIMAC" under "Link Directory (http://www.wimac.ca/forum/local_links.php)".

Choose one of the main categories, depending on which one you choose that is appropriate to the link you wish to add, you may or may not have to drill-down further...

Once in the appropriate category, you click "Add Entry" and fill in the blanks. Going this route, a forum posting is automatically created by the website.

beto9
2009-12-18, 02:07 PM
Thank you Xed... probably the next time I have to submit one I will forget it again... Is not that age is catching up with me, is me trying to catch up to my age!
Alzhei... what?