New Plane [Archive]

Sempai-mj

2016-04-24, 05:21 PM

My new plane, picked it up this weekend in Burlington, On
It actually fit in my mini after removing the cowl, landing gear and tail wheel.

Sempai-mj

2016-04-24, 05:23 PM

Here's the plane.

Tarek Hassoune

2016-04-24, 06:56 PM

Nice happy landings

Kevin Rochon

2016-04-24, 07:57 PM

Nice plane, the junior acrobat of the Bigfoot;).

How are you going to fit it in the car when built:confused:

Sempai-mj

2016-04-24, 08:06 PM

Nice plane, the junior acrobat of the Bigfoot;).

How are you going to fit it in the car when built:confused:

I still have my Nissan Xtrail for Planes and snowstorms. ????

Burning Head

2016-04-24, 09:27 PM

nice, how's the WS...

zorba

2016-04-24, 09:59 PM

How big is it?

mitea_dan

2016-04-24, 11:11 PM

Je l'espère que tu vas jeter les pants et le cowl.
En ce moment donné ton avion serais une merveille.
PS. Bien sûr que le moteur serait un boxer.

Sempai-mj

2016-04-25, 07:54 AM

How big is it?

Wing Span 98" Length 66" Wing Area 1558 sq. in. Flying Weight 14 - 16 lbs.

beto9

2016-04-25, 08:23 AM

Niiiiice! Looks great!

Michael O'Bree

2016-04-25, 11:48 AM

Impressive-look forward to see it in action.

Andrew Fernie

2016-04-25, 07:01 PM

I had one of those RCGuys Decathlons and always liked it. Those high wing fabric covered planes (Decathlon, Citabria, Taylorcraft) just look good to me, especially the clipped wing versions that allow for some level of aerobatics. Unfortunately, it went down in the woods and was shredded by passing through a tree or two...

Enjoy!

briankizner

2016-04-25, 07:05 PM

Nice machine. 50, 55cc, electrons?

briankizner

2016-04-25, 07:07 PM

I was going to mention that I thought Andrew used to have this. Confirmed

Sempai-mj

2016-04-25, 08:04 PM

I had a Carl Golberg version before but was not as big as this one.
Yes those trees are hungry for airplanes, they ate mine too!:shocked:

mitea_dan

2016-04-25, 08:38 PM

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCPZB&P=0

Andrew Fernie

2016-04-25, 09:09 PM

I had a 40cc in mine and that was plenty.

Andrew

Ricardo

2016-04-25, 09:30 PM

Cool, we can do formation with two Decathlons now!

mitea_dan

2016-04-25, 10:41 PM

A mon avis, 40cc ne suffisent pas. Mon Decathlon:
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXYXJ7&P=SM
as 40cc.

Sempai-mj

2016-04-26, 07:38 AM

Je l'espère que tu vas jeter les pants et le cowl.
En ce moment donné ton avion serais une merveille.
PS. Bien sûr que le moteur serait un boxer.

It's going to be all dressed, I don't fly naked planes!:D

Sempai-mj

2016-04-26, 07:39 AM

A mon avis, 40cc ne suffisent pas. Mon Decathlon:
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXYXJ7&P=SM
as 40cc.

I'm going to try DLE 35RA

mitea_dan

2016-04-26, 09:06 PM

Un avion habillé et sans un boxer, c'est bien bizarre, mais, de gustibus non disputandum est.

Sempai-mj

2016-04-27, 11:18 AM

Cool, we can do formation with two Decathlons now!

Yes sir, we'll try it when the plane is ready!

dhamultun

2016-05-03, 03:23 PM

Very nice! :)

Sempai-mj

2016-05-12, 07:59 PM

Well look what I got to power this guy.
Thanks to Chris!
Oh and yes Dan Mitea, the Cowl will fit!

Ricardo

2016-05-12, 08:16 PM

Thats a Beauty!

ChrisPol

2016-05-13, 08:58 AM

I will throw some silicone tube in my field box i had made 2 extensions for the exhaust

Well look what I got to power this guy.
Thanks to Chris!
Oh and yes Dan Mitea, the Cowl will fit!

Cool, Will be Running the 35ra this weekend, I had to rotate the carb installed the throttle servo on the wrong side :)

mitea_dan

2016-05-13, 12:17 PM

En fin, un vrais moteur, félicitations.
Le cowl…ce n’est pas possible avoir tout…

Sempai-mj

2016-05-13, 09:00 PM

En fin, un vrais moteur, félicitations.
Le cowl…ce n’est pas possible avoir tout…

Tous les Avions Besoin une cowl,
Vole pas toute nu!:eek:

dhamultun

2016-05-13, 09:48 PM

I must say that's a nice improvement!

Sent from my iPhone using Tapatalk

Sempai-mj

2016-05-14, 05:02 PM

Ordered from Ted's rudder servo arm for pull pull system.
Installed
engine
Throttle linkage
ignition
Prop
Spinner
Digital Tach.
Fuel tank and tubing.
Skylight window on top of fuselage.
4" inch Wheels

Next, aileron servos.

Sempai-mj

2016-05-14, 05:04 PM

Here's lasted pic.

mitea_dan

2016-05-14, 08:33 PM

C'est parfait, laisse lui comme ca.

Sempai-mj

2016-05-14, 08:46 PM

C'est parfait, laisse lui comme ca.

Non! C'est avion besion une cowl!
:D

ChrisPol

2016-05-15, 03:04 PM

Still waiting on a cowl pic .....

Sempai-mj

2016-05-15, 05:27 PM

Still waiting on a cowl pic .....

Will start engine first, then I'll cut the cowl to fit, I'll do your recommendation and run the spark plug leas outside the cowl and cut a hole on each side for the plug connectors.

Sempai-mj

2016-05-15, 05:39 PM

Almost done, need to secure wiring and set throws and then start engine.
Also will be installing a opto kill switch.

Dwight Macdonald

2016-05-17, 10:20 PM

Looking good. Will sound great!

Sempai-mj

2016-05-29, 06:49 PM

Started the motor today while neighbor was cutting his lawn with a lawn tractor, the noise of the plane blended in so not to annoy other neighbors.

The engine started after the seventh flip of the prop.
Now just waiting for the wing struts and then the maiden:)

Michael O'Bree

2016-05-29, 07:19 PM

[QUOTE=Sempai-mj;48068]Started the motor today while neighbor was cutting his lawn with a lawn tractor, the noise of the plane blended in so not to annoy other neighbors.

Good one - I will have to remember the neighbor lawn equipment/engine test trick. That is, if I ever wean myself off electric:)

Sempai-mj

2016-06-11, 06:14 PM

It's cowl time, to avoid cutting up the cowl the spark plugs and silicone muffler pipe extension protrude through the cowl.
Two plugs and two tubes, one on each side.

Kevin Rochon

2016-06-11, 08:15 PM

Nice job Michael....but with an electric there would be no holes;)

mitea_dan

2016-06-11, 08:36 PM

Tu es proche de perfection, mais, le cowl, les pants...dommage.

Sempai-mj

2016-06-11, 08:45 PM

Nice job Michael....but with an electric there would be no holes;)

The only thing electric on this gasser is the ignition! :)

Sempai-mj

2016-06-11, 08:46 PM

Tu es proche de perfection, mais, le cowl, les pants...dommage.

Dan, pas les pants! :o

mitea_dan

2016-06-11, 08:58 PM

La photo n'est pas complète. En ce cas tu es très proche de perfection.

Burning Head

2016-06-12, 11:34 AM

Great cutting job Mike

Sempai-mj

2016-06-12, 01:17 PM

La photo n'est pas complète. En ce cas tu es très proche de perfection.

Ok Dan un autre

mitea_dan

2016-06-12, 07:16 PM

Le cowl cache une beauté. Ce n'est pas dommage? Panse toi, Afrodita avec vêtements?

Kevin Rochon

2016-06-12, 08:09 PM

Le cowl cache une beauté. Ce n'est pas dommage? Panse toi, Afrodita avec vêtements?

Oui mais Afrodita elle ne fait pas de bruit et ne pollue pas;)

mitea_dan

2016-06-12, 08:30 PM

Bruit, j'ai écouté bien? C'est la musique d'anges, catharsis.

https://www.youtube.com/watch?v=xE8Y3dYSb1w

Sempai-mj

2016-06-19, 06:15 PM

Received the struts; installed them and adjusted throttle linkage.
It's done and ready to maiden next weekend at the BBQ. Weather permitting.

zorba

2016-06-19, 08:18 PM

It better be good weather. I hate to see us sitting in the shack telling lies..

Burning Head

2016-06-20, 10:20 AM

I will call Larry and Laura to let them know about the BBQ

zorba

2016-06-20, 06:09 PM

Thank you Richard Merci

Sempai-mj

2016-06-27, 08:37 AM

Well it flew yesterday, :) required some right aileron trim, about 4 clicks..
I will investagate why, perhaps rudder sticking or wing warp.