Quote:
Originally Posted by Mezri
An other reason to think realy about the ESC...Even from factory, I saw many stupidities from factory ...there is one nice flat surface on the ESC, and an other bumpy surface. By reflex, I so many putting the double side foam tape, and glue that surface...Bad...that is the heatsink surfce taht need some air.
Even if your ESC is well positioned, try to exchange it with an other,...in your process "by elimination", it might be faulty.
|
Thanks Mezri, I'll check that. FYI I changed from a DX9 to a DX6e transmitter yesterday, no power loss. Very strange.